전체상품목록 바로가기

본문 바로가기

상품조르기 대량구매문의
New

[Furious] ACROWHOOP Mini FC (inductrix용) (해외배송 가능상품)

기본 정보
판매가 55,000원
적립금 275원 (0.50%)
배송비 3,000원 (80,000원 이상 구매 시 무료)
수량 수량증가수량감소
SNS 상품홍보
SNS 상품홍보

개인결제창을 통한 결제 시 네이버 마일리지 적립 및 사용이 가능합니다.

상품 옵션
구분
옵션 선택

(최소주문수량 1개 이상 / 최대주문수량 0개 이하)

사이즈 가이드

수량을 선택해주세요.

위 옵션선택 박스를 선택하시면 아래에 상품이 추가됩니다.

상품 목록
상품명 상품수 가격
[Furious] ACROWHOOP Mini FC (inductrix용) 수량증가 수량감소 55000 (  275)
총 상품금액(수량) : 0 (0개)
바로구매하기 장바구니 담기 SOLD OUT 관심상품등록

이벤트

  • 최초 Tiny WhoopF3 FC
  • 강력한 FET ? 모터당 최대 6.3A 출력
  • 깨끗한 영상을 위한 LC 필터 내장
  • FPV 장비나 수신기를 위해 5V/1A 출력과 3.3V 출력
  • BeeBrain 보다 가격이 착합니다.
  • MPU6000를 사용한 F3 FCSPI BUS를 통해 보다 높은 성능을 제공합니다.
  • Frsky SBUS를 통한 텔레메트리 기능 내장, RSSI/전압 정보를 Taranis 조정기에서 확인!


Furious FPV Acrowhoop - Take It To the Outer Limits.
Pushing the outer limits and beyond, Furious FPV leaves nothing unchanged in the FPV world, and when it comes to aircraft like the Inductrix, we have developed the all new Acrowhoop, allowing full aerobatic & race mode flight. Are you ready?javascript:setmp(0);
Introducing the very 1st F3 chip on the market in a package this compact, the Furious Acrowhoop has been designed for cutting edge FPV insanity, offering pilots the ability to push like crazy with this palm sized machine. Further this with FrSky compatible micro Rx, integrated LC filter, and a 5V 1A BEC that maintains perfect camera functionality & stability, the Acrowhoop is nothing short of miraculous in the world of micro FPV.
With the F3 chip and MPU6000, the Acrowhoop is ready for acro & race mode via BetaFlight, offering pilots the ability to dial in what defines the way they want to fly. With the Acrowhoop, ultimate levels of FPV madness await in a feature packed layout that leaves nothing left to desire.
For fans of micro quads like the Inductrix, take your flight to an entire new world with the Acrowhoop - the pinnacle of FPV insanity via Furious FPV.
Features:
- Inductrix 용으로 설계
- Acro 모드 & Race 모드 지원
- Industry 1st F3 Chip w/ MPU6000
- High Power 5V 1A Built In BEC for the Utmost In Camera Functionality
- Integrated LC Filter for Clean Video Capability
- All FETs are rated at 6.3A maximum
- Built-in Frsky Sbus receiver, Frsky telemetry
- 3.3V external for Specktrum users
- 무게 : 3.8g
Configuration
Following you'll find all the necessary steps in order to configure your FC before doing the maiden, to take advantage of all the potential that the Acro Whoop has.
IMPORTANT: If we need to install a new firmware in our Acro Whoop we must select the PIKO BLX target. All the Furious FPV flight controllers to date share the same target.
Before getting into the GUI we'll bind the receiver with the Taranis, Horus or XJT module.
 

1. Frsky Taranis와 바인딩
 In the Taranis, go to MODE SETUP (page 2) in the model configuration.

  • Go to Mode inside Internal RF and select D8.
  • 수신기의 바인딩 버튼을 누른체 배터리를 연결하여 전원을 공급합니다.
  • Release the button. A green LED lights up in the receiver.
  • Going back to the Taranis; we press BIND. The transmitter beeps, indicating it’s in bind mode.
  • Wait for the green LED on the receiver to turn off. The binding procedure has finished.
  • Taranis 바인드 모드를 나온 후 .
  • 수신기 전원을 차단을 위해 배터리를 분리합니다. 

 
2. XJT 모듈과 바인딩

  • Using the dip switches of the XJT module, select the D8 mode. They shoud be in the following position: switch 1 = ON, switch 2 = OFF.
  • Press and hold the receiver bind button and plug your battery in to turn the receiver on.
  • Release the button. A green LED lights up in the receiver.
  • Press and hold the bind button and turn the transmitter on.
  • Release the button. A green light shoud blink in the module, indicating it’s in bind mode.
  • Wait for the green LED on the receiver to turn off. The binding procedure has finished.
  • Turn the transmitter off.
  • Unplug the battery to turn off the receiver.


3. Cleanflight, Betaflight 을 사용한 수신기 설정

  • In the PORTS PORTS tab, select the UART that corresponds to the receiver (usually UART3 in F3 flight controllers) and activate Serial RX.
  • Save by clicking on the Save and Reboot button.
  • In the CONFIGURATION tab, in the Receiver Mode section, select RX_SERIAL.
  • In the same tab, in the Serial Receiver Provider section, select SBUS.
  • Save by clicking on the Save and Reboot button.
  • Go to CLI and type the following commands:
  • set sbus_inversion = OFF
  • save
  • The FC will reboot, applying the change.
  • Go to the RECEIVER tab and make sure the receiver acts like it should.


4. Telemetry 설정:

  • In the PORTSPORTS tab, select the UART that corresponds to the telemetry (usually UART2 in F3 flight controllers) and select FrSky in Telemetry. Leave the baudrate to AUTO.
  • Go to CLI, and type the following commands:
  • set telemetry_inversion = OFF
  • save
  • The FC will reboot, applying the change.
  • Make sure you’re getting thetelemetry values in our Taranis correctly

상품결제정보

주문 시 입력한 입금자명과 실제 입금자의 성명이 반드시 일치하여야 하며, 7일 이내로 입금되지 않은 주문은 자동취소 됩니다.

배송정보

  • 배송 방법 : 택배
  • 배송 지역 : 전국지역
  • 배송 비용 : 3,000원
  • 배송 기간 : 2일 ~ 5일
  • 배송 안내 : 산간벽지나 도서지방은 별도 금액 추가됩니다.

교환 및 반품정보

▶ 상품을 공급 받으신 날로부터 7일이내에 가능합니다.
▶ 구매자의 단순변심으로 인한 반품/교환의 경우에는 구매자가 왕복 배송비(5,000원)을 부담하여야 합니다.
▶ 교환 및 반품하실 상품은 CJ대한통운(1588-1255)를 이용하여 보내주시기 바랍니다.
▶ CJ대한통운이 아닌 타 배송업체(편의점택배 포함)을 사용시에는 반드시 선불로 보내주시기 바랍니다.

 교환 및 반품시 주소: 서울시 강남구 테헤란로 406(대치동) 샹제리제센터 A동 1201호


▶ 교환 및 반품이 가능한 경우

  - 주문 내용과 다른 제품을 받았을 경우.
  - 배송된 상품이 파손된 경우.
  - 상품 수령 후 미개봉상태로 7일 이내인 경우.


▶ 교환 및 반품이 불가능한 경우

  - 교환/반품 신청기간이 경과된 경우.
  - 소비자의 책임 있는 사유로 상품등이 멸실 또는 훼손된 경우.
  - 포장을 개봉하였거나 포장이 훼손되어 상품가치가 상실된 경우. 
  - 고객님의 사용 또는 일부 소비에 의하여 상품의 가치가 현저히 감소한 경우.
  - 시간의 경과에 의하여 재판매가 곤란할 정도로 상품등의 가치가 현저히 감소한 경우.
  - 복제가 가능한 상품등의 포장을 훼손한 경우.
  - 기타 '전자상거래 등에서의 소비자보호에 관한 법률'이 정하는 청약철회 제한사유에 해당되는 경우.

서비스문의

고객센터 02-6202-5555

이전 제품

다음 제품